Sika Sikaflex 118 Extreme Grab 290ml [White]

Sikaflex?-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Internal and external use. ? Very high initial grab Fixing of heavy objects without temporary fixation Good workability ? Usage An adhesive to bond most construction components and materials such as: Concrete Masonry Most stones Ceramic Wood Metals Glass Mirrors* ? Advantages Very high initial grab Fixing of heavy objects without temporary fixation Good workability Very low emissions Adhesive-sealant with CE marking ? Packaging 290 ml cartridge, 12 cartridges per box ? Colour White ? Composition Silane terminated polymer ? Storage conditions The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging. ? Density ~1.40 kg/l ? Technical Information Shore A hardness ~50 (after 28 d) ? Tensile strength ~2.2 N/mm2 ? Tear propagation resistance ~10.0 N/mm ? Service temperature ?40 °C min. / +80 °C max. ? SUBSTRATE PREPARATION The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive. ? For optimum adhesion and critical, high performance applications the following priming and/or pre-treatment procedures shall be followed: ? Non-porous substrates ? Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. Clean and pre-treat using Sika? Aktivator-205 applied with a clean cloth. ? Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours). ? Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika? Aktivator-205 applied with a clean cloth. After a waiting time of > 15 minutes (< 6 hours). Apply Sika? Primer-3 N applied by brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing. ? PVC has to be cleaned and pre-treated using Sika? Primer-215 applied with a brush. Allow a waiting time of > 15 minutes (< 8 hours) before bonding / sealing. ? Porous substrates ? Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika? Primer-3 N applied by brush. ? Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours). ? For more detailed advice and instructions contact Sika Technical Services. ? Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Primers also improve the long term adhesion performance of a sealed joint. ? CLEANING OF EQUIPMENT Clean all tools and application equipment immediately after use with Sika? Remover-208. Once cured, hardened material can only be removed mechanically. ? For cleaning skin use Sika? Hand Wipes.