Builders Edge Fibreglass Joint Tape for Plaster Reinforcement 50mm x 20m

Strengthen joints, seams, and repairs with this tough fibreglass mesh tape. It helps prevent hairline cracks, improves bond strength, and delivers a smooth base for top coats on plasterboard and cement sheet surfaces. Why you will like it Reinforces joints to reduce cracking around seams and patches Open mesh allows compound to key through for a strong bond Clean edges for easy alignment along butt and tapered joins 50mm width suits standard plasterboard seams and corner work 20m roll is great for rooms, small renos, and ongoing touch ups Great for Plasterboard joins and butt joints Repairs around door and window openings Ceiling crack reinforcement Patching holes and dents before finishing Use with base coat and top coat compounds How to use Ensure the surface is clean, dry, and free of dust. Lay the tape centered over the joint or crack, pressing to seat it flat. Apply a generous first coat of compound through the mesh and let it dry. Feather additional coats wider than the last until flush with the surface. Sand lightly once dry, then prime and paint. Specifications Brand: Builders Edge Type: Fibreglass joint reinforcement tape Width: 50 mm Length: 20 m Material: Fibreglass mesh Colour: White Tips For best results, keep the tape flat with no bubbles before coating. Use a wider knife on each subsequent coat to blend the repair. Allow full dry time between coats to avoid shrinkage lines. Glues Australia helps Australians fix, build, and finish with confidence.